Fitting a Pieced Border to the Quilt

[View My TQS Profile djane]

I want to add a pieced border to the quilt I am currently working on (the pinwheel quilt in my most recent blog post). The quilt centre is 5 x6 blocks and the blocks will finish at 12 inches. The pieced border will be made from the 4 inch finished pinwheel blocks. I want to put a plain border between the centre of the quilt and the pieced border. What width of border do I need to add so that the pieced border will fit properly? Thanks in advance for the help.

[View My TQS Profile PosyP]

I'm pretty certain that Sue Garmen covers this problem in her help videos from her 2009 BOM.http://www.thequiltshow.com/os/lessons.php/classes_id/1016/teacher/susanh

[View My TQS Profile Margo]

Debbie, look for Sue's video #6 in the link that Rosemary posted!

[View My TQS Profile kathyst2]

I want to add a pieced border to the quilt I am currently working on (the pinwheel quilt in my most recent blog post). The quilt centre is 5 x6 blocks and the blocks will finish at 12 inches. The pieced border will be made from the 4 inch finished pinwheel blocks. I want to put a plain border between the centre of the quilt and the pieced border. What width of border do I need to add so that the pieced border will fit properly? Thanks in advance for the help.

Debbie, your quilt center should be 60 inches by 72 inches finished, given that your blocks are 12 inches finished. Those are both multiples of 4 inches. If your outer border is also 4 inch blocks, you will need a 2 inch finished spacer border on all sides. (Or anything that is a multiple of 2 inches- but your'e probably looking for more narrow rather than wider, right?) If your quilt center doesn't measure exactly 60-1/2 by 72-1/2 inches, then using Sue's tutorial will get you the more exact answer. If you don't have that on hand, I can walk you through it.

Kathy

[View My TQS Profile djane]

Thanks everyone for your help. I will check out the link and then go for it!

[View My TQS Profile djane]

Hi Everyone--I have finished my quilt centre and the pinwheel borders. I am not sure how to do the floaters because, of course, the measurements of my quilt top are not exactly right. Here are my calculations:

For the sides--my quilt centre is 73 inches long. My pieced border is 77 inches. Using Sue's formula I came up with needing 2 1/2 inch floaters on the sides.

For the top and bottom-- my quilt centre is 61 inches wide. My pieced border is either 64 3/4. Using the formula I came up with needing a 2.35 inch floater on top and bottom.

Am I correct? If so, how do I cut a fabric width that is 2.35 or 2 7/20 inches!

I sure appreciate your help. I feel a bit dense that I am having so much trouble figuring this out!

[View My TQS Profile Margo]

Debbie, your math is right on! If I were to cut strips 2.375" wide, I would just use tape to mark my rotary cutting ruler to cut strips 2-3/8" so I wouldn't have to keep looking for the right little marks on the ruler.

2-1/4" = 2.25" or 2-2/8"
(2.375" or 2-3/8")
2-1/2" = 2.50" or 2-4/8"
The difference between 1/4" and 1/2" = 1/4" or .25"
Divide that difference by 2 and you get .125
Add .125 to .25 and you get .375

So... that is 3/8"

[View My TQS Profile djane]

Thanks so much Margo! I am glad I did the math right although fractions were never my favourite! I almost didn't use the pieced border but I really want to add floater borders to my tool box of quilting skills!