Auditioning Colors and Fabrics for Sedona Star 2012

[View My TQS Profile winkydink13]

very nice,

[View My TQS Profile winkydink13]

Yippee!!! My Kit has arrived, now I have some questions before I start, I am doing a dummy run before I start on the kit, I thought it wise for two reasons one being I am new to all of this and secondly after reading the posts I wanted to make sure that I was going to get it right, with the quilts I have made in the past I haven't pre washed and have loved the effect for this one with all the stars I was wondering if I should? In the past I have run it past a few people I know and they said no for the stars, but thought it wise to check it out with you guys. I have printed out paper templates so that I can check it all. In my dummy run I am using Ricky Tim's stabiliser as I thought I should keep it the same as the kit, when I lay out the rings on the template against the star on the stitching lines my ring comes to 16 1/2" I will go on with the dummy and finish that before I use the kit but wanted to make sure of the centre measurement first, can anyone please let me know as I don't want to get it wrong, I would like it all to fit nicely at the end, I would love to hear form Sarah on the measurements as I know others on the forum would too, I would appreciate any advice in this, thanks.

[View My TQS Profile debkendall]

It will be interesting to see how the silk handles with all the paper piecing in the triangles. Going to really have to be careful since the centers are fairly small and the points on the outside are narrow. I may experiment with a product called "Fray Check" by Dritz to help cut down on the fraying, expecially at the triangle points. My only fear is that it might discolor the silk. Does anyone have any experience with this product?

Carol, I'm not sure if you have already tested the "Fray Check" yet or not, but I use a product called "Fray Block" by June Tailor. I use it on my hand appliqué when I need to clip curves. It works the same as "Fray Check" but does not yellow with age and it leaves the fabric soft whereas "Fray Check" leaves the fabric somewhat hard or stiff. You can purchase "Fray Block" at Joann Fabrics and I have seen it also at some of my local quilt shops. I have not ever had any problems with it discoloring my fabrics, but if I were you, I would test it on some silk scraps first just to be sure.

[View My TQS Profile Margo]

Thanks for the head's up about Fray Block, Debbie! I'm not familiar with that product, but will definitely try some!

[View My TQS Profile Scoopie]

I too, am wishing that Sarah had listed the finished (or unfinished) measurements for us! I know we have templates, and are sewing right to the foundations, but since everyone's printers are different and everyones seams vary, we really don't know if the unfinished size of all the circles sewn together should be 16 1/2" or 16 3/4" (as a couple of people have said theirs are) or when I measure my very narrow outer ring's template, I get 17" unfinished. (Yes, I have 3" squares and a perfect 18" across the page from outer grid line to outer grid line.) This not knowing whose measurement is correct is worrysome, because it will effect whether or not the next month will fit to it! We really need some measurements right here with month one, just for peace of mind! Please, Sarah?

Dawn
In beautiful Northwest Montana

[View My TQS Profile Lorna1021]

[quote="Scoopie"]I just had to share what I've decided to do with my Sedona Star. I am still playing with it, and have gone as far as I can until I buy 8 yards (I think) of black for all of my background. So far, this is all from my stash, and all hand dyes that I have purchased over the years. I do not have the yellows that I need, so the yellow star point is a stand-in, and my ring is not sewn closed, because that may not be the right yellow. Also, the last border of each star point will be black, and therefore the star points are incomplete, too. Lots of fun, so far!

Dawn


Dawn, Your colors are beautiful

Lorna

[View My TQS Profile winkydink13]

I too, am wishing that Sarah had listed the finished (or unfinished) measurements for us! I know we have templates, and are sewing right to the foundations, but since everyone's printers are different and everyones seams vary, we really don't know if the unfinished size of all the circles sewn together should be 16 1/2" or 16 3/4" (as a couple of people have said theirs are) or when I measure my very narrow outer ring's template, I get 17" unfinished. (Yes, I have 3" squares and a perfect 18" across the page from outer grid line to outer grid line.) This not knowing whose measurement is correct is worrysome, because it will effect whether or not the next month will fit to it! We really need some measurements right here with month one, just for peace of mind! Please, Sarah?

Dawn
In beautiful Northwest Montana

Hi Dawn, yes my templates measure the same, so I must be on the right track, now I will go ahead and stitch up my dummy run and then on to the kit, this is fun can't wait to do it all, they all look so amazing, thanks so much

[View My TQS Profile adamsme]

My circle also finishes amost at 17".

[View My TQS Profile PittsburgPam]

I didn't see that there was a JPEG of the file so what I did was open the PDF and made it very large on my screen, only showing about 1/2 of it. I did a Screen Print and pasted it into MS Paint. I then scrolled down in the PDF to get the bottom of it, Screen Print, and paste into MS Paint. Set the Select tool to Transparent, crop off the top screen stuff, and paste the bottom of the PDF onto the top.

I then copied in the fabrics I was using and with the Eyedropper tool I picked up the color and filled in the pieces.

BOM2012JPEG.jpg

[View My TQS Profile LeslieJC]

Really love your colors, Pam! Looking forward to seeing it come to life...

[View My TQS Profile peggytil]

The last post with the colors done in Flash is beautiful. What is Flash? I would love to use my V6 software to audition colors. Where and when will the information be available?

[View My TQS Profile peggytil]

Can anyone help me with Corel Draw in the V6 software? I don't know how to use it to audition fabric.
Peggy